2700K ~ 6500K warm white/natural white/cool white smd 5050 digital led strip APA102C flexible chip tape light

1) Double line signal transfer, addressable Pixel led Strip, APA102C ic built in 5050 RGB diode.

2) Individually control -- 1 IC control 1 LED chip.

3) Standard reel length: 1 meter/roll, also can be customized. 

4) Cutted : 1 integrated RGB LEDs per segment, can be cut per 1 LED.

    Easily cut with wire cutters, there are cut-lines.  

5) Power supply : must use a 5 V DC power supply to power this strip.

    Do not use higher than 5V,or the entire strip will be destroyed.

6) Non-waterproof IP20 + 3M tape on back side of PCB. 

    Waterproof : silicon tube casing IP65 +10pcs silicon clips&screw for installation, or 3M adhesive back side.  

7) Connection : 4PIN JST SM connector on both ends (DC+, CLK, DAT, GND),  

    DC+ and GND connect to power, DAT/CLK and GND connect to controller.

    Extra two wires for power feeding to avoid voltage drop.

8) PCB color : white and black. 

9) LED QTY: 144LEDs per meter, also have 30leds/m, 60leds/m. 1 IC & 1 LED CHIP. 

10) LED Brightness: RGB (Red115200mcb, Green 244800mcd, Blue 100800mcd), or White 480000mcd. 

11) Controller : SD card controller, Artnet, Ardunio, Dmx Decoder, etc.

12) Brand: SHIJILIGHTING

Product parameter

Connection Way :

> SPI signal : LED strip + LED power supply + LED Controller

> DMX control : LED strip + LED power supply + DMX controller + DMX Decoder

> LED controller : SD card controller, RF remote controller, DMX controller, Arduino... ( offline /PC online )

> LED power supply : Meanwell power supply, SJ-series power supply... ( waterproof / non-waterproof ) 

Controller System:

1) Offline controller : SJ-K-1000C SD controller supports 2000pixels max. 

    T-4000C and K-8000C can control 4000 and 8000pixels.

2) Online controller : SJ-T-400K, 500K for online working, can controller max 4000, 6000pixels.

3) Compatible with DMX, ardunio and the controller who can operate the SPI signal.

SJ-K-1000C SD controller support 2000pixel Max. 

 Power supply

Aplication:

This excellent light and user-friendly designs make LED strip perfect for numerous applications. ie cove lights, back lights, cabinet lights, edge light, architectural lights for corridor, canopy, arcway, lights for path and contour marking, etc.

They can be a good choice for lights for hotels, restaurant, night clubs, coffee/ wine bars, shopping malls, various shops, cinemas, beauty centers, office fronts, even lights for household kitchens or living room, etc.

Packaging:

1meter/roll in an anti-staic bag, 90meters/carton, 

10.50KG/Carton 

Carton Size: 46.5cmx26cmx46cm

Shipment :

1.Goods will be delivered within 3-5 working days after the payment received;

2.We ship item via Door to Door service express or air and sea.

 Service:

1.Reply you in 24 hours .

2.Experienced staffs answer all your questions in fluent English 

3.Customized design is available. OEM&ODM are welcomed .

4. Exclusive and unique solution can be provided to our customer by our well trained and professional engineer.

5.Special discount and protection of sales area  provided to our distributor 

Warranty:

1.All products we sell are in good quality and have been tested before they are shipped out

2.We offer 2 years Warranty

certification:

ShenZhen Shiji Lighting Co.,Ltd, focus on pixel and dmx led lighting solutions, is started from 2010, with so many years experice, we have clients from all the world especially Europe and America. We can also do customized products.

Our product range is as follows :

1.5050&3528 LED module Backlight for Channel Letters &signage

2.RGB LED pixel light &LED string light 

3.LED flexible strips & LED rigid bar for Decorative Lighting 

4. LED point light 

Clients are welcome to buy our standard products ,or send us OEM requests.

Our team:

Our factory:

 1) What are the best selling products in Shiji Lighting?
- LED strip light: Mainly SMD5050,SMD2835 and SMD3528
- LED Rigid Bar
- LED Tube Light

2) What kind of products will Shiji Lighting develop for the next year?
Shiji Lighting is devoted to innovation in lastest LED technology. We never stop researching new LED lights since the establishment. We keep the valued customers posted of newsletters on the development every week.

3) What is the main market for Shiji Lighting?
We are selling more to EU market because the markets have high quality standard for LED products. The rate stands our turnover up to 50-60%. But other new markets are increasing demand of the new LED technology. We are also optimistic about the markets for American market and Asian regions.

4) What LEDs do you usually use for your LED products?
For high level products, we use Epistar LED Chip; and middle level types, we mainly use San’an LED strip to find best balance between quality and cost. Other brands of LEDs are allowed according to customer’s requirement.

5) What is Shiji Lighting lead time?
Usually delivery time will be in 12-15days. But it will take a little longer if with heavy burden of production task. And more time will be taken with customized products.

6) Can Shiji Lighting offer OEM product?
Yes, OEM products are allowed. We have an excellent design/engineering team to offer support and we have several years experience in OEM. The strips can have different size, layout, customer logos and labels. We will strictly follow the principal that we won’t disclose or sell customer unique designs or jointly developed products to another third party.

7) Do you have warranty for products?
Yes, we have 2/3/5 years warranty for different kinds of products. During the warranty period, if customers have the approval showing product quality issues and if certified by Shiji Lighting engineers, we would request customers to ship back the failure parts and replace new items with the transportation charged being paid by us.

8) Does Shiji Lighting design its products?
Yes, Shiji Lighting designs and assembles all the products we are selling. Our engineers have abundant knowledge of optics, electronics, mechanical and thermal management, as well as light control technology. Some of them have successful experience to design lighting products for world famous brands. Our basic principle to design internal driver and circuit is safety under EMC list possibility and reliability.