waterproof addressable dmx rgb led strip lighting for DJ night club ceiling indoor outdoor decoration

1) This strip is 24V 60leds DMX512 led digital strip that different from normal SPI led pixel strip.

    Protrol by standard Dmx 512 controller /Artnet, the signal is parallel not series.

    it cannot auto-addressable, you have to write the DMX address code by the DMX-addressaable writer.

2)  Its advantage is parallel DMX 512 signal could avoid leds color influenced by the failure of one light in serial connection.

3) Entire strip has 10 pixels (30channels), 60leds in a meter with 12mm width PCB board.

4) Communication between DMX512 LED digital strips are synchronized perfectly under support of Artnet/DMX512 led controllers.

5) Vivid lighting performance operated by Matrix software, Artnet/DMX512 led controllers.

6) bare board strip 12mm width, IP20 non-waterproof, with 3M adhensive tape on back

    IP65 waterproof with silicon tube,12.5mm width, with screws and metal clips, the clips fit over the waterproof silicon tube,     easy to mount / install the led strip.

7) Flexible PCB material, black PCB / White PCB options, 60leds&1IC as a segement, each segement can be cut, there is a cut line every 100mm.

8) Standard 5 meters/roll, with a 4Pin JST SM connector on both end and separated Power /Ground Wires. Customized length is workable.

Wire define

There is 4Pin JST SM female /male connector on both end for signal input/output;

Red : +5V,    Blue: Date+,    Green: Date- ,   Yellow: address writting,     Black: Ground

Related products 

                           10060-DMX -DC 12V                                                         10032-DMX-DC 5V

Controller :

AU-U8 controller 8x512 channel USB DMX controller

Connection diagram:

Application:

Packaging

5meters/roll, 90reels/Carton, 15KGS /carton  

Carton Size: 46.5cmx28cmx46cm

Shipment :

1.Goods will be delivered within 3-5 working days after the payment received;

2.We ship item via Door to Door service express or air and sea.

 Service:

1.Reply you in 24 hours .

2.Experienced staffs answer all your questions in fluent English 

3.Customized design is available. OEM&ODM are welcomed .

4. Exclusive and unique solution can be provided to our customer by our well trained and professional engineer.

5.Special discount and protection of sales area  provided to our distributor 

Warranty:

1.All products we sell are in good quality and have been tested before they are shipped out

2.We offer 2 years Warranty

certification:

ShenZhen Shiji Lighting Co.,Ltd, focus on pixel and dmx led lighting solutions, is started from 2010, with so many years experice, we have clients from all the world especially Europe and America. We can also do customized products.

Our product range is as follows :

1.5050&3528 LED module Backlight for Channel Letters &signage

2.RGB LED pixel light &LED string light 

3.LED flexible strips & LED rigid bar for Decorative Lighting 

4. LED point light 

Clients are welcome to buy our standard products ,or send us OEM requests.

Our team:

Our factory:

 1) What are the best selling products in Shiji Lighting?
- LED strip light: Mainly SMD5050,SMD2835 and SMD3528
- LED Rigid Bar
- LED Tube Light

2) What kind of products will Shiji Lighting develop for the next year?
Shiji Lighting is devoted to innovation in lastest LED technology. We never stop researching new LED lights since the establishment. We keep the valued customers posted of newsletters on the development every week.

3) What is the main market for Shiji Lighting?
We are selling more to EU market because the markets have high quality standard for LED products. The rate stands our turnover up to 50-60%. But other new markets are increasing demand of the new LED technology. We are also optimistic about the markets for American market and Asian regions.

4) What LEDs do you usually use for your LED products?
For high level products, we use Epistar LED Chip; and middle level types, we mainly use San’an LED strip to find best balance between quality and cost. Other brands of LEDs are allowed according to customer’s requirement.

5) What is Shiji Lighting lead time?
Usually delivery time will be in 12-15days. But it will take a little longer if with heavy burden of production task. And more time will be taken with customized products.

6) Can Shiji Lighting offer OEM product?
Yes, OEM products are allowed. We have an excellent design/engineering team to offer support and we have several years experience in OEM. The strips can have different size, layout, customer logos and labels. We will strictly follow the principal that we won’t disclose or sell customer unique designs or jointly developed products to another third party.

7) Do you have warranty for products?
Yes, we have 2/3/5 years warranty for different kinds of products. During the warranty period, if customers have the approval showing product quality issues and if certified by Shiji Lighting engineers, we would request customers to ship back the failure parts and replace new items with the transportation charged being paid by us.

8) Does Shiji Lighting design its products?
Yes, Shiji Lighting designs and assembles all the products we are selling. Our engineers have abundant knowledge of optics, electronics, mechanical and thermal management, as well as light control technology. Some of them have successful experience to design lighting products for world famous brands. Our basic principle to design internal driver and circuit is safety under EMC list possibility and reliability.